Featuring Philmac’s unique Slide and Tighten technique, 3G compression fittings for IPS OD HDPE pipes make installation simple. In addition they offer a high integrity 230psi rated connection and with no corrosion or lead risk. Connections are available from ½” to 1-1/2”.

  • 1

    Visual Stop

    The body flange on the IPS OD compression fitting acts as a visual stop to indicate when the nut is tightened. There is no benefit in further tightening the nut.

  • 2

    No Pipe Twist During Installation

    The fitting has been designed to minimize pipe twist as the nut is tightened. Pipe twist can impact on not only the connection you have just made but also on the connection at the other end of the line.

  • 3

    Slide and Tighten

    Installation could not be easier. Simply insert the pipe into the fitting until the first point of resistance and then tighten the nut up to the flange of the fitting body. No pipe preparation is needed and no force is required to push the pipe pas the seal. Assembly is so easy you can even do it under live conditions.

  • 4

    Flexibility

    Philmac IPS OD fittings are made for permanent, high-security joints. However, if the need arises, the range allows joints to be re-done. By backing the nut off with a wrench, the pipe can be removed, and the pipe system moved.

  • 5

    Security

    Philmac IPS OD compression fittings are CSA and NSF 61 approved for potable water use.

  • 6

    Compact Size

    The size of the Philmac IPS OD compression fitting has been kept to a minimum, making the fitting ideal to be used in confined areas.

  • 7

    No Loose Components

    If the nut is loosened there is no danger of losing components, as the collet and seal are retained in the body of the fitting. Losing components in the trench becomes a thing of the past.

  • 8

    No Special Tools or Equipment Required

    There is no need for cumbersome, expensive equipment or access to power. There is also no need to prepare the pipe in any way. Simply cut the pipe square and then slide it into the fitting. The only tool required is a standard wrench to tighten the nut.

  • 9

    Made from Advanced Materials

    3G IPS OD Series fittings are made for advanced, lightweight thermoplastics to provide a 50 year in service lifetime at standard operating conditions. In addition the fittings, unlike metal components provide a high degree of corrosion resistance.

  • 10

    Rated to 230psi

    Philmac 3G SIDR fittings are rated to 230psi to meet the needs of high pressure systems.

IPS-OD Product Sizes

COUPLERS (poly x poly)

Product Number SIZE
99412200 1/2" x 1/2"
99413300 3/4" x 3/4"
99414400 1" x 1"
99415500 1-1/4" x 1-1/4"
99416600 1-1/2" x 1-1/2"

REDUCING COUPLERS (poly x poly)

Product Number SIZE
99413200 3/4" x 1/2"
99414200 1" x 1/2"
99414300 1" x 3/4"
99415300 1-1/4" x 3/4"
99415400 1-1/4" x 1"
99416300 1-1/2" x 3/4"
99416400 1-1/2" x 1"
99416500 1-1/2" x 1-1/4"
99417400 2" x 1"
99417500 2" x 1-1/4"
99417600 2" x 1-1/4"

SLIP COUPLERS (poly x poly)

Product Number SIZE
99412210 1/2" x 1/2"
99413310 3/4" x 3/4"
99414410 1" x 1"
99415510 1-1/4" x 1-1/4"
99416610 1-1/2" x 1-1/2"

TEES (poly x poly x poly)

Product Number SIZE
99432200 1/2" x 1/2" x 1/2"
99433300 3/4" x 3/4" x 3/4"
99434400 1" x 1" x 1"
99435500 1-1/4" x 1-1/4" x 1-1/4"
99436600 1-1/2" x 1-1/2" x 1-1/2"

SPANNERS For Philmac fittings

Product Number SIZE
40702431 Y-Spanner 1/2” to 1” (20mm-32mm) plastic
40705711 Y-Spanner 1-1/4” to 2” (40mm-63mm)

REDUCING TEES (poly x poly x poly)

Product Number SIZE
99433200 3/4" x 3/4" x 1/2"
99433400 3/4" x 3/4" x 1"
99434300 1" x 1" x 3/4"
99435300 1-1/4" x 1-1/4" x 3/4"
99435400 1-1/4" x 1-1/4" x 1"
99436300 1-1/2" x 1-1/2" x 3/4"
99436400 1-1/2" x 1-1/2" x 1"
99436500 1-1/2" x 1-1/2" x 1-1/4"
99437310 2" x 2" x 3/4"
99437400 2" x 2" x 1"

FEMALE TEES (poly x poly x FI NPT)

Product Number SIZE
99442100 1/2" x 1/2" x 1/2"
99442200 1/2" x 1/2" x 3/4"
99443100 3/4" x 3/4" x 1/2"
99443200 3/4" x 3/4" x 3/4"
99443300 3/4" x 3/4" x 1"
99444100 1" x 1" x 1/2"
99444200 1" x 1" x 3/4"
99444300 1" x 1" x 1"
99444400 1" x 1" x 1-1/4"
99445100 1-1/4" x1-1/4" x 1/2"
99445200 1-1/4" x 1-1/4" x 3/4"
99445400 1-1/4" x 1-1/4" x 1-1/4"
99445500 1-1/4" x 1-1/4" x 1-1/2"
99446100 1-1/2" x 1-1/2" x 1/2"
99446200 1-1/2" x 1-1/2" x 3/4"
99446500 1-1/2" x 1-1/2" x 1-1/2"
99446600 1-1/2" x 1-1/2" x 2"

MALE TEES (poly x poly x MI NPT)

Product Number SIZE
99493100 3/4" x 3/4" x 1/2"
99493200 3/4" x 3/4" x 3/4"

MALE ADAPTORS (poly x MI NPT)

Product Number SIZE
99422100 1/2" x 1/2"
99422200 1/2" x 3/4"
99423100 3/4" x 1/2"
99423200 3/4" x 3/4
99423300 3/4" x 1"
99424200 1" x 3/4"
99424300 1" x 1"
99424400 1" x 1-1/4"
99425300 1-1/4" x 1"
99425400 1-1/4" x 1-1/4"
99425500 1-1/4" x 1-1/2"
99426500 1-1/2" x 1-1/2
99426600 1-1/2" x 2"

FEMALE ADAPTORS (poly x FI NPT)

Product Number SIZE
99482100 1/2" x 1/2"
99482200 1/2" x 3/4"
99483100 3/4" x 1/2"
99483200 3/4" x 3/4"
99483300 3/4" x 1"
99484200 1" x 3/4"
99484300 1" x 1
99484400 1" x 1-1/4"
99485400 1-1/4" x 1-1/4"
99485500 1-1/4" x 1-1/2"
99486500 1-1/2" x 1-1/2
99486600 1-1/2" x 2"

MALE ELBOWS (poly x MI NPT)

Product Number SIZE
99472100 1/2" x 1/2
99473200 3/4" x 3/4"

WALL PLATE ELBOWS (poly x FI NPT)

Product Number SIZE
99422900 1/2" x 1/2
99423900 3/4" x 3/4

ELBOWS (poly x poly)

Product Number SIZE
99452200 1/2" x 1/2"
99453200 3/4" x 1/2"
99453300 3/4" x 3/4"
99454400 1" x 1"
99455500 1-1/4" x 1-1/4"
99456600 1-1/2" x 1-1/2"

END CAPS

Product Number SIZE
99402900 1/2"
99403900 3/4"
99404900 1"
99405900 1-1/4"
99406900 1-1/2"

FEMALE ELBOWS (poly x FI NPT)

Product Number SIZE
99462100 1/2" x 1/2
99462200 1/2" x 3/4"
99463100 3/4" x 1/2"
99463200 3/4" x 3/4"
99463300 3/4" x 1"
99464300 1" x 1"
99464400 1" x 1-1/4"
99465400 1-1/4" x 1-1/4"
99465500 1-1/4" x 1-1/2"
99466500 1-1/2" x 1-1/2"
99466600 1-1/2" x 2"

PVC CONNECTION KITS* (Grip Ring Only)**

Product Number BODY SIZE PVC PIPE SIZE
94402110 #2 1/2"
94403110 #3 3/4"
94404110 #4 1”
94405110 #5 1-1/4”
94406110 #6 1-1/2”
94407110 #7 2”
*Not suitable for 2” IPS-OD Large Bore
** Only suited to IPS-OD where Nut and Seal can be re-used

Installation/troubleshooting videos

Need some help? View our installation/troubleshooting videos