Innovative gas solutions made easy with Slide and Tighten technology by Philmac. The Philmac gas compression range for secure gas connections every time.

  • 1

    Slide and Tighten

    Installation could not be easier. Simply push the stiffener into the pipe, then insert the pipe into the fitting until the first point of resistance. Finally tighten the nut up to the flange of the fitting body. No pipe preparation is needed and no force is required to push the pipe pas the seal.

  • 2

    Ease of Repair

    Repair is made simple with Philmac Gas compression fittings. Installation is easy and once completed there is no need to let the joint cure or cool down. Simply make the repair and you can instantly turn the gas supply back on.

  • 3

    No Special Tools or Equipment Required

    There is no need for cumbersome, expensive equipment or access to power. There is also no need to prepare the pipe in any way. Simply cut the pipe square and then slide it into the fitting. The only tool required is a standard wrench to tighten the nut.

  • 4

    Rated to 125 PSI

    Philmac Gas compression fittings are pressure rated to 125psi to meet the needs to Gas pressure systems.

  • 5

    Strength of Connection

    The range of Philmac Gas compression fittings has been designed to ensure that the connection, when properly formed using a stiffener, will exceed the strength of the PE pipe.

  • 6

    Corrosion Protection

    All Philmac Gas fittings are made from advanced thermoplastic materials. These materials provide excellent protection against corrosion and there is no need for cathodic protection or protective coating.

  • 7

    Flexibility

    Philmac Gas fittings are made for permanent, high-security joints. However, if the need arises, the range allows joints to be re-done. By backing the nut off with a wrench, the pipe can be removed, and the pipe system moved.

  • 8

    Security

    Philmac Gas compression fittings are IAPMO UPC approved to ASTM F1924 to ensure peace of mind when using the fittings on gas installations.

  • 9

    Visual Stop

    The body flange on the Philmac Gas fitting acts as a visual stop to indicate when the nut is tightened. There is no benefit in further tightening the nut.

  • 10

    Compact Size

    The size of the Philmac Gas compression fitting has been kept to a minimum, making the fitting ideal to be used in confined areas.

  • 11

    No Pipe Twist During Installation

    The fitting has been designed to minimize pipe twist as the nut is tightened. Pipe twist can impact on not only the connection you have just made but also on the connection at the other end of the line.

  • 12

    No Loose Components

    If the nut is loosened there is no danger of losing components, as the collet and seal are retained in the body of the fitting. Losing components in the trench becomes a thing of the past.

Philmac Gas Product Sizes

COUPLERS (IPS OD poly x IPS OD poly)
Product Number SIZE
95212200 ½” x ½”
95213300 ¾” x ¾”
95214400 1” x 1”
95215500 1-1/4” x 1-1/4”
95216600 1-1/2” x 1-1/2”
95217700 2” x 2”

TRANSITION COUPLERS (IPS OD poly x CTS poly)
Product Number SIZE
95212110 ½” x ½”

ELBOWS (poly x poly)
Product Number SIZE
95252200 ½” x ½”
95253300 ¾” x ¾”
95254400 1” x 1”
95255500 1-1/4” x 1-1/4”
95256600 1-1/2” x 1-1/2”
95257700 2” x 2”

TEES (poly x poly x poly)
Product Number SIZE
95232200 ½” x ½” x ½”
95233300 ¾” x ¾” x ¾”
95234400 1” x 1” x 1”
95235500 1-1/4” x 1-1/4” x 1-1/4”
95236600 1-1/2” x 1-1/2” x 1-1/2”
95237700 2” x 2” x 2”

Installation/troubleshooting videos

Need some help? View our installation/troubleshooting videos

Learn More