SIDR

Installation of double-ended products is made easy with 3G SIDR fittings. The installer can simply tap each insert in separately to each end of the pipe. This is much simpler than many other fittings which require the pipe to be manipulated in at on end as inserts are connected.

3G SIDR fittings enable the joint to be easily disconnected and reconnected. Simply by loosening the pipe and taking the insert out of the body of the fitting, the pipe can be freed. This is a real advantage if your pipe is connected to a piece of equipment and you need to relocate or winterise that equipment.

Philmac 3G SIDR fittings are rated to 230psi to meet the needs of high pressure systems.

Philmac 3G SIDR compression fittings are CSA and NSF 61 approved for potable water use.

The size of the Philmac 3G SIDR compression fitting has been kept to a minimum, making the fitting ideal to be used in confined areas.

3G SIDR Series fittings are made for advanced, lightweight thermoplastics to provide a 50 year in service lifetime at standard operating conditions. In addition the fittings, unlike metal components provide a high degree of corrosion resistance.

The body flange on the SIDR compression fitting acts as a visual stop to indicate when the nut is tightened. There is no benefit in further tightening the nut.

The fitting has been designed to minimize pipe twist as the nut is tightened. Pipe twist can impact on not only the connection you have just made but also on the connection at the other end of the line.

There is no need for cumbersome, expensive equipment or access to power. There is also no need to prepare the pipe in any way. Simply cut the pipe square and then slide it into the fitting. The only tool required is a standard wrench to tighten the nut.