The perfect solution for effective control of service line pressure
Ratio valves are manufactured from high grade materials to provide reliable operation and a high level of corrosion resistance. Not only are spare parts available but these valves are backed by a full maintenance service. Philmac’s range of ratio valves are designed to handle situations where reliable, controlled high pressure operationis essential.
-
1
Maintained Pressure
Under no flow conditions the downstream pressure is maintained because the valve remains closed and it will not open until the downstream pressure drops when installed in a fixed head system.
-
2
Simple Sealing Action
Because the valve relies on only one moving part it means the valve has high reliability and shuts off when required. There are no internal ports which can become blocked or springs that can become corroded.
-
3
Connection Flexibility
To make installation easy Philmac offer both threaded (up to 2”) and flanged connections (up to 6”). Flanged connections are available in almost any flange pattern including DIN, ANSI, BS or AS standards.
-
4
Tamperproof
There are no external regulators or pilot tubes which can be tampered with so once the valve is installed it will continue to operate at its pre set ratio.
-
5
Quality Materials
The screwed ratio valves are made from DZR brass meaning the valves have a high resistance to corrosion in solid and water environments. The flanged ratio valves are manufactured from gunmetal which again provides a high degree of corrosion resistance and strength. Please note different materials can be used if specific application requirements require it.
-
6
Multi-position Installation
The valves have been designed to work in either vertical or horizontal position for flexible installation.
-
7
High Pressure Shut off
The ratio pressure reducing valves are rated to 500 psi (35 bar) at 68 degrees Fahrenheit (20 degrees centigrade). However they can be rated to 725 psi (50 bar) if required by specific application.
-
8
High Flow Rates
Due to the internal design when the valve is fully open it allows full flow of water.
-
9
Serviceable
The valves have been designed to be fully serviced and repair kits containing all the seals, o-rings and instructions are readily available.
Flanged Ratio Product Sizes
FLANGED SERIES RATIO VALVES (Tested)
| Product Number | Ratio | FLANGES SIZES TO AS2129 |
|---|---|---|
| 90 2601 00 | 2:1 | 50 |
| 90 2602 00 | 3:1 | 50 |
| 90 2603 00 | 4:1 | 50 |
| 90 2604 00 | 5:1 | 50 |
| 90 2605 00 | 2:1 | 65 |
| 90 2606 00 | 3:1 | 65 |
| 90 2607 00 | 4:1 | 65 |
| 90 2608 00 | 5:1 | 65 |
| 90 2617 00 | 1.5:1 | 80 |
| 90 2609 00 | 2:1 | 80 |
| 90 2610 00 | 3:1 | 80 |
| 90 2611 00 | 4:1 | 80 |
| 90 2612 00 | 5:1 | 80 |
| 90 2639 00 | 1.5:1 | 80 |
| 90 2626 00 | 2:1 | 80 |
| 90 2627 00 | 3:1 | 80 |
| 90 2628 00 | 4:1 | 80 |
| 90 2629 00 | 5:1 | 80 |
| 90 2634 00 | 1.5:1 | 100 |
| 90 2630 00 | 2:1 | 100 |
| 90 2631 00 | 3:1 | 100 |
| 90 2632 00 | 4:1 | 100 |
| 90 2633 00 | 5:1 | 100 |
| 90 2660 00 | 1.5:1 | 100 |
| 90 2651 00 | 2:1 | 100 |
| 90 2652 00 | 3:1 | 100 |
| 90 2653 00 | 4:1 | 100 |
| 90 2654 00 | 5:1 | 100 |
| 90 2665 00 | 1.5:1 | 150 |
| 90 2655 00 | 2:1 | 150 |
| 90 2656 00 | 3:1 | 150 |
| 90 2657 00 | 4:1 | 150 |
| 90 2658 00 | 5:1 | 150 |
| 90 2676 00 | 2:1 | 150 |
| 90 2677 00 | 3:1 | 150 |
| 90 2678 00 | 4:1 | 150 |
| POA for Marine Grade Ratio Valves. | ||
| If what you require does not appear on the page please contact customer service or your local territory manager for additional details |
